Treatment Time Calculation Table - Klas-P6
   
1) Energy loss is postulated to be linear at 7.5% per mm of tissue.
2) Treatment time is calculated by Monte Carlo Simulation method.
 
Treatment Time (second) = Dose (J/cm3) x 1000 x Laser Beam Spot Size (cm²)
—————————————————————————
End Power (mW) x Energy Loss Factor (/cm)
   
Model No.: Klas-P6 + Cap-A
Laser beam spot size: 0.13 cm²
Dose
(J/cm3)		 Depth of Tissue
(cm)		 Energy Loss Factor Treatment Time (second)
Wavelength 808nm
Model No. Klas-P62 Klas-P64
LD Power (mW) 250 460
End Power (mW) 220 390
Power Density (mW/cm²) 1,692 3.000
3 J/cm² Surface 1   2 1
3 J/cm3 0.5 0.6772   3 1.5
1.0 0.4586   4 2
1.5 0.3105   6 3
2.0 0.2103   8 5
2.5 0.1424   12 7
3.0 0.0964   18 10
3.5 0.0653   27 15
4.0 0.0442   40 23
4.5 0.0299   59 33
5.0 0.0203   87 49
Model No.: Klas-P6 + Cap-C
Laser beam spot size: 0.5 cm²
Dose
(J/cm3)		 Depth of Tissue
(cm)		 Energy Loss Factor Treatment Time (second)
Wavelength 808nm
Model No. Klas-P62 Klas-P64
LD Power (mW) 250 460
End Power (mW) 200 370
Power Density (mW/cm²) 400 740
1 J/cm² Surface 1   2.5 1.4
1 J/cm3 0.5 0.6772   4 2
1.0 0.4586   5 3
1.5 0.3105   8 4
2.0 0.2103   12 6
2.5 0.1424   18 9
3.0 0.0964   26 14
3.5 0.0653   38 21
4.0 0.0442   57 31
4.5 0.0299   83 45
5.0 0.0203   123 67
Model No.: Klas-P6 + Cap-D
Laser beam spot size: 0.5 cm²
Dose
(J/cm3)		 Depth of Tissue
(cm)		 Energy Loss Factor Treatment Time (second)
Wavelength 808nm
Model No. Klas-P62 Klas-P64
LD Power (mW) 250 460
End Power (mW) 200 370
Power Density (mW/cm²) 400 740
1 J/cm² Surface 1   2.5 1.4
1 J/cm3 0.5 0.6772   4 2
1.0 0.4586   5 3
1.5 0.3105   8 4
2.0 0.2103   12 6
2.5 0.1424   18 9
3.0 0.0964   26 14
3.5 0.0653   38 21
4.0 0.0442   57 31
4.5 0.0299   83 45
5.0 0.0203   123 67
Model No.: Klas-P6 + Cap-E
Laser beam spot size: 0.13 cm²
Dose
(J/cm3)		 Depth of Tissue
(cm)		 Energy Loss Factor Treatment Time (second)
Wavelength 808nm
Model No. Klas-P62 Klas-P64
LD Power (mW) 250 460
End Power (mW) 180 320
Power Density (mW/cm²) 2,571 4,571
3 J/cm² Surface 1   1.2 0.7
3 J/cm3 0.5 0.6772   2 1
1.0 0.4586   3 1
1.5 0.3105   4 2
2.0 0.2103   6 3
2.5 0.1424   8 5
3.0 0.0964   12 7
3.5 0.0653   18 10
4.0 0.0442   26 15
4.5 0.0299   39 22
5.0 0.0203   57 32
Model No.: Klas-P6 + Cap-S
Laser beam spot size: 3 cm²
Dose Depth of Tissue
(cm)		 Energy Loss Factor Treatment Time (minute)
Wavelength 808nm
Model No. Klas-P62 Klas-P64
LD Power (mW) 250 460
End Power (mW) 104 184
Power Density (mW/cm²) 35 61
3 J/cm² Surface 1   87 sec. 49 sec.
3 J/cm3 0.5 0.6772   2 1
1.0 0.4586   3 2
1.5 0.3105   5 3
2.0 0.2103   7 4
2.5 0.1424   10 6
3.0 0.0964   15 8
Konftec Corporation © Copyright 2023, All Rights Reserved