Effective		Constant laser intensity is maintained by:
			Innovative optics design leads to the maximum output laser power.
			Advanced integrated circuit designed by Konftec to maintain the specific power output even the battery is in low capacity.
Safe		Konftec's integrated circuit design with full protection of:
			EDS (Electrostatic Discharge)
			over-temperature
			under-voltage
			soft-start
			short-term reverse battery connection
Convenient		Outstanding autoclavability of fiber rod
			The excellent transmission characteristics of fiber rod remains unaffected even after being autoclaved several thousand times.
			Ability of standing up to repeated machine washing.
Easy to Use			Intelligent program start/stop switch for the simplest operation, can easily be used by practitioner.
			Powered by rechargeable Li-ion battery module which provides Klas-DX61 approximately 4 hours continuous operation.

Operation Environment	635nm: 0 ~ 55 °C (32 ~ 131 °F); 10 ~ 95%RH (Non-condensing) 660nm: 0 ~ 60 °C (32 ~ 140 °F); 10 ~ 95%RH (Non-condensing) 808nm: 0 ~ 50 °C (32 ~ 122 °F); 10 ~ 95%RH (Non-condensing)
Power Supply	Li-ion Rechargeable Battery Module
Laser Material	Semiconductor Laser Diode 635nm…GaAs 660nm…AlGaInP 808nm…AlGaAs
Laser Wavelength  … Output Power	635nm…220mW 660nm…150mW 808nm…250mW or 460mW
	Note: The measured output power data shown in the delivered test report indicates the power from the laser diode.
Laser Dose Setting	0.1 ~ 99.9 J (Joule)
Time Setting	1 ~ 999 S (Second)
Acoustic Beep Alert	Start, Setting, Each Joule during Operation, Stop
Housing Material	Stainless Steel or Aluminum Alloy
Enclosure Protection	IP54 (NEMA 4) Protection against dust Protection against water spray
Dimensions	Min. 193(L) x Ø26 mm; 7.6(L) x Ø1 in. Max. 275(L) x Ø26 mm; 10.8(L) x Ø1 in.
Weight	Max. 250 g (8.8 ounce)
Verification	EMC Directive 93/42/EEC (Operation Environment: Medical Electrical Equipment) Standard Applied: IEC 60601-1 and EC 60601-1-2
Medical Device Certificate	ISO 13485: 2003

Laser Optic Cap & Fiber Rod (6 pcs)
Type of Cap	Cap-A	Cap-C	Cap-D	Cap-E	Cap-N	Cap-S
Model No.	WO-420	WO-425	WO-422	WO-423	WO-421	WO-424
Reference Picture
Laser Beam Spot Size	0.13 cm²	0.5 cm²	0.5 cm²	0.13 cm²	End Dispersion	3 cm²
Applications	Acupuncture & Single Point	Acupuncture & General	Dental	Auricular Acupuncture	Nasalis	Multiple

Lithium-ion (Li-ion) Battery Module (2 pcs)		WB-531
Nominal Capacity	800 mAh
Nominal Voltage	3.7 V
Protection	Over Charge
Charging Time	1.7 Hrs

Li-ion Battery Charger		WP-151
Charge Capacity	3 x Li-ion Battery Module
Power Supply	90 ~ 264V AC, 47Hz ~ 63Hz, Max. 0.5A (115V AC), 0.25A (230V AC) Short Circuit and Overload Protection; Auto Recovery Mode

Laser Safety Goggles (2 pairs)		WG-221
Frame	Plastic
Lens	Polycarbonate with hard coating
Protection	Side shields
Spectral Characteristics)	OD (Optical Density) 3+

Aluminum Case		WC-123
Dimensions	450(L) x 330(W) x 130(H) mm 17.7(L) x 13(W) x 5.1(H) in.
Weight	1.7 Kg (3.8 Lb)

Model No.	Laser Wavelength / Output Power
	Red Laser		Infrared Laser
	660nm/150mW	635nm/220mW	808nm/250mW	808nm/460mW
Single Laser Module
Klas-DX61
Klas-DX62
Klas-DX82
Klas-DX84
Dual Laser Modules
Klas-DX6182
Klas-DX6184
Klas-DX6282
Klas-DX6284

Handheld Power Meter		LaserCheck
Wavelength Range	400 ~ 1064 nm
Displayed Power Range	9.99 µW to 999 mW; Auto-ranging
Accuracy	±5%
Measurement Display	3-digit LCD with power unit indicator
Sensor Aperture Size	8 mm

Laser Safety Clip-on Glasses		WG-222
Frame	Plastic
Lens	Polycarbonate with hard coating
Spectral Characteristics	OD (Optical Density) 3+ Rave>99% @ 600~820nm

Patient Block Out Glasses		WG-228
Frame	Plastic
Lens	Polycarbonate with hard coating
Spectral Characteristics	OD (Optical Density) 7+ @ 190nm to 11,000nm
Head Strap	Adjustable