LD-1xx

	LD-1xx
	Fiber Rod Laser Module
	LLLT Dental Application Laser Acupuncture Application

LD-1 Fiber rod laser module is developed from long-term experiments and therapy practices. This patented product is made using the combination of modern laser diode technology and computerized digital control philosophy. LD-1 applied the RED laser, INFRARED laser or the COMBINATION lasers is capable of delivering two independent LLLT treatments for the dental therapies.

Effective	Constant laser intensity is maintained by:
		Ergonomically shaped and high transmission fiber rod to guide the laser beam evenly irradiate the treating area.
		Innovative optics design leads to the maximum output of laser power.

Convenient	Outstanding autoclavability of fiber rod
		The excellent transmission characteristics of fiber rod remains unaffected even after being autoclaved several thousand times.
		Ability of standing up to repeated machine washing.


Operation Environment	0 ~ 50 °C (32 ~ 122 °F); 10 ~ 95%RH (Non-condensing)
Storage Environment	-20 ~ 85 °C (4 ~ 185 °F); 10 ~ 95%RH (Non-condensing)
Laser Material	Semiconductor Laser Diode 660nm: AlGaInP 808nm: AlGaAs
Laser Wavelength	660nm, 808nm
Output Power	w/o Fiber Rod: 100 mW ~ 450 mW with Fiber Rod: 80 mW ~ 360 mW Note: The measured output power data shown in the delivered test report indicates the power from the end of fiber rod.
Laser Beam Spot Size	0.5 cm²
Housing Material	Stainless Steel
Cable Connector	D-SUB Connector
Cable Length	170 cm
Dimensions	188(L) x Ø26 mm; 7.4(L) x Ø1 in.
Weight	340 g (12 ounce), Cable Included

*Other wavelengths and output powers are available upon request.