Click to download product brochure (PDF)
Click for Aculas-AM Series List
AM-100 AM-100
AM-100C AM-100C
AM-100D AM-100D
AM-100W AM-100W
AM-102 AM-102
AM-102B AM-102B
AM-102V AM-102V
AM-151 AM-151
AM-200 AM-200
AM-201 AM-201
LLLT Laser Hood
AM-320 AM-320
Click for Megalas-AM-800
Laser Irradiation System Laser Irradiation System
CE Certification Laser Hood CE Certification Laser Hood
Click for Aculas-HB Series List
Auricular
HB-150E		 HB-150E
Nasalis
HB-150N		 HB-150N
Laser Shower
HB-850		 HB-850
Erectile Dysfunction
HB-950		 HB-950
Click for emLas Series List
Laser Wrap
emLas-150		 emLas-150
emLas-250 emLas-250
emLas-320 emLas-320
Auricular
emLas-520		 emLas-520
Hair Loss
emLas-800		 emLas-800
Click for Klas Series List
Laser Acupuncture Laser Acupuncture
Auricular Laser Acupuncture Auricular Laser Acupuncture
Dental LLLT Unit Dental LLLT Unit
Nasalis LLLT Unit Nasalis LLLT Unit
Multiple Applications LLLT Unit Multiple Applications LLLT Unit
5-in-1 LLLT Unit 5-in-1 LLLT Unit
250 ~ 450mW Infrared Laser
6-in-1 Infrared Laser 6-in-1 Infrared Laser
Intelligent LLLT Dose Unit
Intelligent LLLT Dose Unit Intelligent LLLT Dose Unit
 
   
  Click for Accessories & Parts
Click to Enlarge Klas®-D  Download Data Sheet
Dental LLLT Unit
Red Laser 660nm/50 ~ 100mW
Infrared Laser 808nm/110mW

There are 230 positive studies done by 81 universities from 37 different countries showing from 80 to 95% success using Low Level Laser Therapy (LLLT) on over 24 different dental procedures.

Klas-D is developed from "Laser Biostimulation" theory and "Low Level Laser Therapy (LLLT)" medical approval. This newest and patented device is made using the combination of modern laser technology and advanced integrated-circuit control.

Klas-D is the most scientifically advanced and effective LLLT device for dental application.

Klas-D is specially designed and clinically proven for dental therapies include:
Dentinal Hypersensitivity
Gingivitis
Herpes Simplex
Mucositis
Paresthesia
Periodontitis
Postoperative Pain Reduction
Pulpitis
       Therapy Protocol

 Click to Enlarge
Click to Enlarge
Click to Enlarge
Click to Enlarge
 
Effective  

Constant laser intensity is maintained by:

Ergonomically shaped and high transmission fiber rod to guide the laser beam evenly irradiate the treating area.
Innovative optics design leads to the maximum output laser power.
Advanced integrated circuit designed by Konftec to maintain the specific power output even the batteries are in low capacity.
Safe   Konftec's integrated circuit design with full protection of:
EDS (Electrostatic Discharge)
over-temperature
under-voltage
soft-start
short-term reverse battery connection
Convenient   Outstanding autoclavability of fiber rod
The excellent transmission characteristics of fiber rod remains unaffected even after being autoclaved several thousand times.
Ability of standing up to repeated machine washing.
Easy to Use   Vandal resistant stainless steel pushbutton switch for the simplest operation, can easily be used by practitioner.
Powered by three alkaline AAA batteries which provide Klas-D50 approximately 9 hours continuous operation.
Operation Environment  660nm: 0 ~ 60 °C (32 ~ 140 °F); 10 ~ 95%RH (Non-condensing)
808nm: 0 ~ 50 °C (32 ~ 122 °F); 10 ~ 95%RH (Non-condensing)
Storage Environment  -20 ~ 85 °C (4 ~ 185 °F); 10 ~ 95%RH (Non-condensing)
Power Supply  3 x AAA or Rechargeable Battery
Laser Material  Semiconductor Laser Diode
660nm…AlGaInP
808nm…AlGaAs
Laser Wavelength 
& Output Power 		 660nm…50 ~ 100mW
808nm…110mW
Note:
The measured output power data shown in the delivered test report indicates the power from the laser diode.
Laser Beam Spot Size  0.5 cm²
Housing Material  Stainless Steel
Switch  Vandal Resistant Pushbutton; Stainless Steel Housing and Bezel
Enclosure Protection  IP54 (NEMA 4)
Protection against dust
Protection against water spray
Dimensions  188(L) x Ø26 mm; 7.4(L) x Ø1 in.
Weight  230 g (8.1 ounce), Includes Batteries
 Verification  EMC Directive 93/42/EEC
(Operation Environment: Medical Electrical Equipment)
Standard Applied: IEC 60601-1 and EC 60601-1-2
Medical Device Certificate  GMP  GMP (Good Manufacturing Practice) ISO 13485
Standard Accessories  (1) Alkaline Battery: 3 pcs
(2) Fiber Rod (P/N: WF-422): 1 pc
(3) Aluminum Case (P/N: WC-121)		 WC-121
Click to Enlarge
(Extra Quantity)
Fiber Rod WF-422
The fiber rod has high resistance to chemical attacks and is perfectly compatible with the strict hygiene standards called for in dental surgery.
The excellent transmission of the fiber rod remains at a consistent high level, even after being subjected to several thousand autoclave and machine washing cycles.		 Fiber Rod
Rod Material  Fiber
Diameter  8mm; Bent
Transmission Ratio  > 80% (for Red & IR Range Laser)
Model No. Laser Wavelength Output Power † Energy Density
(J/cm²-sec)		 Battery Operation Time
(Hours)		 Laser
Classification
w/o Fiber Rod w/ Fiber Rod
Klas-D50 660nm 50mW 40mW 0.06 9 Class IIIb
Klas-D61 660nm 100mW 80mW 0.12 5 Class IIIb
Klas-D81 808nm 110mW 90mW 0.18 4 Class IIIb
 †  Laser Effective Area = Laser Beam Spot Size…0.5 cm²
  Treatment Time (second) = Dose (J/cm3) x 1000 x Laser Spot Size (cm²)
—————————————————————————
End Power (mW) x Energy Loss Factor (/cm)

Treatment Time Calculation Table

Konftec Corporation © Copyright 2004-2010, All Rights Reserved
The True Medicine  
   CE Verification     Verification
   GMP Good Maufacturing Practice   GMP
 
We Are Providing
  Warranty   Warranty
  Money Back Guarantee   Money Back

     
   

Watch Video

 Does laser light penetrate through clothes? (time: 3:20)
Low Level Lasers in Dentistry
Dentistry Therapy Protocol
Klas Batteries Installation Guide
Klas-D50 Meets FDA (CDRH) Class IIIa Safety Regulation
Treatment Time Calculation Table
- Klas series
Download PDF File Klas-D
User's Guide
  Download PDF File LLLT Dental Laser Comparison Table